#Omxplayer file time loading install#

🎉🎉🎉 Case 2: Your Pi doesn’t have WiFi enabled, e.g. Now reboot your Pi to see if the video plays automatically: sudo reboot Last step: Enable auto play whenever the Pi boots: sudo update-rc.d videoloop defaults Run the following commands: - Start the video loop: /etc/init.d/videoloop start - Close the video loop: /etc/init.d/videoloop stop - Re-open the video loop if it closes: /etc/init.d/videoloop repair Create the bash script - Create a file called videoloop in the /etc/init.ddirectory: sudo nano /etc/init.d/videoloop - Copypaste the content from this link (step 3) into the file and change the varible video_path to match the path to your videofile ( /boot/video.mp4) - Change the permissions of the script to allow writing and execution: sudo chmod 755 /etc/init.d/videoloop 4.

#Omxplayer file time loading install#

Install libraries sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install omxplayer (this can take about 10 minutes.) sudo apt-get install screenĢ.Type: ssh You will get prompted for the password. Open a terminal on your computer and try if you can speak to the Pi: ping raspberrypi If the name doesnt work, try with the IP address (should be visible in the list of connected devices) Stop the output by hitting control + C (on Mac).If it does appear on the list, congratulations! You can now communicate with your Pi:.If your Pi does not appear in the list of connected devices, try these troubleshooting tips.In your router’s admin interface search the list of connected devices, look for a device named “raspberrypi” (or similar).Connect a monitor to your Pi to see when booting has finished and if there were any problems.Put the SD card into your Pi and connect it to electricity.You can find a sample file here - Copy and fill in your data - Copy the file into the /boot folder of the SD card the name (SSID) of your WiFi, the password, the type of encryption, the country code, and more.

It contains the necessary settings to connect with your WiFi, e.g.

Instruct your Pi to automatically connect to your WiFi whenever it boots: - You need to create a file named “wpa_nf”.

This just sets a flag to tell the OS that we want to enable SSH

Instruct your Pi to allow SSH connections: - In the same /boot folder create an empty file called ssh (no extension, no content).

Copy your video file to the /boot folder.

8min) - Mount the micro SD card in your computer - Use the “Raspberry Pi Imager” Application to install an OS - We’re going to install Raspberry Pi OS Lite (Legacy), a legacy version of the OS because of the video libraries ( omxplayer) we’re going to need

Install the Raspberry Pi OS on your Pi (ca.

A computer - A Raspberry Pi with a power supply - SD-Card (optional: SD-Card reader for your computer) - WiFi - Helpful: access to the admin interface of the router - Optional: A Monitor and a mini-VGA to XYZ adapter (whatever your monitor needs: regular HDMI, VGA or DVI) Step by Step 1. Communicate with your Pi via SSH over your WiFi network - Install necessary video libraries via the internet - Add a bash script to play a video file automatically Requirements